Ok thank you Hunt3r, I will make sure that you test it out!Originally Posted by ;
Go search the pips
Ok thank you Hunt3r, I will make sure that you test it out!Originally Posted by ;
Go search the pips
When you put the pin check the function Scalping if is activated then you can change if you prefer or notOriginally Posted by ;
Hello Senior Members.
Recently discovered this thread when looking Forex DASHBOARD on you-tube. Had gone first few pages and require lot of guts to experience all of them, maybe require a month to accomplish that.
I've already installed EA and 2 hooks (thanks to detailed first article and movie). As I could see, 3000 attached files and 230 pages, can somebody (regular member here) assist the new comers by giving below information and summary
1- Finest Cameras
2- Finest Preset files
2- Finest Pins. (there are dozens and dozens of PINs discussed here, which one is going to be best to start and get green pips?)
Thanks a lot Beforehand.
Welcome to Board Buddy! First find out every row of the dashboard. Then, use the filters that are built-in. Then add a pin, according to your requirements. There are a variety of choices and egies. So that they won't be offended, I won't list the coders per pin. From the pages, you will understand them. Do not forget to talk about them, if you find the settings that are best. Surely you will be also helped by the dashboard in hand trading. And in my estimation, follow your egy, however, look at what Sam2x, , FxMadness etc do.Originally Posted by ;
#1044;#1086;#1073;#1088;#1077; #1076;#1086;#1096;#1098;#1083; #1085;#1072; #1073;#1086;#1088;#1076;#
Greatest Tpl and presets will make you lose more_Originally Posted by ;
The newbie tpl you will make probably will be greener _/
Best way to learn this little monster is by discovering faults when things go wrong_
below are some sets used in the past, I just needed few mints to modify to the current Eax I am using today
as months ago when I tried those I had otehr old Eax places ,,,
Utilize it Pin(much less) original, without a Pins, together with Ma's using Base/quote Ratio/heiken_ashi/bid ratio,, whatsoever is a good idea to test and see . .
Then use it by placing a single Pin only,
then you may try out some of the pins created by sam / https://www.nigeriaforextrading.com/...weblogger.html
actually I post one of my favo Pin the MegaFx_V1.01
finally the last one produced by Jagkuz_ https://www.nigeriaforextrading.com/...ervations.html
and using a tpl published by Payforward / https://www.nigeriaforextrading.com/...weblogger.html
Eax if I recall well has 630 Plus Entries of that 500 Are effective Parameters
most of the queries are answered by the Eax itself if looking at them and everytime you change something
return look at chart what occurred . . What changed _/ /
Do things, try for a month, observe, watch, write down notes, loe the fantastic egy for you
... and after you will have some sleepless nights, then you will start see some light
but that will be your light, your comprehension_
Things we borrow from others they are sometimes taken away from us, however what we learn on our own
they belong to us and nobody can take them from us _
So my friend the nice nightmare has started for you
Understand as much as you can and tell us what we do not know yet about Eax_
lt;lt; Attached are the following for anyone to get started and play gt;gt;
Eax Pin(Less) / No Pins
Eax_PinLS1CandlsHas_Ma
Eax_PinLS2_RS-Bqr-Bq-CsmRt
Eax_PinLS3_CndlsHASMa_CsmRt
Eax Ccfp Based
Eax1_Cfp2Scasma (Sam-Pins)
Eax3_TL7_MultiCfp_2DH4H12Mtf (Sam-Pins) (Jaisis-Pin) [[These collections can be performed all the Sam MixPlugIn, however for that little speak to Sam]]
Eax Matrix (Sinus-Pin)
PINEAX_MATRIX_IMPROVED
Eax MegaFx (Sam-Pin)
EAX4-24_MegaFx_V1.01
Read these Post-Link Notes about the Pin or Pins Folder to create inside indior folder or my Tpl won't work_
After doing what oh right, all will work 101%
https://www.nigeriaforextrading.com/...l-traders.html
https://www.nigeriaforextrading.com/...1662922990.rar
https://www.nigeriaforextrading.com/...1539039390.rar
https://www.nigeriaforextrading.com/...5102759543.rar
https://www.nigeriaforextrading.com/...9587389819.rar
https://www.nigeriaforextrading.com/...2755049801.rar
https://www.nigeriaforextrading.com/...1239988996.rar
https://www.nigeriaforextrading.com/...-happened.html
https://www.nigeriaforextrading.com/...s-signals.html
I admire you in the explanations. Exactly, clear and short.Originally Posted by ;
A few pics guidelines about news and the way they're on Eax_
Basically there are 3 Boxes for the News the primary news that could be selected by low/med/high impact
then there's the news calendar by Tim morris
afterward the news breack
Things can be sorted the way one enjoys
I dont utilize The news as I have used in the past up to 4 Eax on precisely the same Mt4 and so I left it lighter by disabling the news_
Also I find it important to know what some of this Color Definitions
that I love to divide into two components and these are Colors associated with the signals
and Colors associated with Your Lines/Borders/Numbers Highlighted etc ...
I unite these pictures from my Eax collection
and here proposed a rough guide of what some parameters do_
Additionally Eax color guide to determine where and how colour change when choosing different colours
Hey men, so after a very long time I am reattempting to try the EAX dash again, and give it a go yay.
I have loaded up 3 charts to start, all with different pins, and settings for various tests. So far all sounds great except for a couple things. The main issue is that the dashboard doesn't appear to update itself, as may be seen from the screenshot, and display everything.
I have tried to directly click gt; Pro gt;Properties gt; OK, also reloaded the template, opened a fresh chart and reload EAX, restarted my platform, but there's no modifiion, its still the same.
Also the pins columns do not show properly, they appear to blink on and off form the columns, and I have columns revealing signs from hooks which aren't there. I believed nothing, although that when doing the above it would update itself.
So any ideas of how to fix this? Thanks.
1 Attachment(s)if pins blink you must see to not awakened senders number.i mean to put two pins to send sign exactly the same snare 1 such as in eax usual if you set two separate indior pins to send sign exactly the same snare in eax then eax pin blink.and when you have a column with sign pin you think is not there... you need re-check your entire charts belive me EAX pin following ?pin reset? and ?eax reset? show still indie then it signifies something send sign there.i never had an error to have sign in eax snare from . . .nowhere.Originally Posted by ;
Use reset pin and reset eax buttons.
I guess all Sam hooks have expired and to utilize them, one has to either rent or buy them. Am i wrong?Originally Posted by ;