Mark Fisher's ACD method

[numaymiv]

Hello everyone!At this moment I am reading Mark Fisher "The Logical Trader" and I am very impressed with his method.Could anyone tell me where I can get the daily values ??of ACD to configure my graphics?It would be great if they could give their comments about this method.Greetings from Essen, Germany!Bernhard

[gavecompan12]

Well, values ??A and C can be obtained as follows: A = 10% of ATR C = 1.5 * A good, all this is a bit mixed.Values ??A and C are not so important, you can use the ones you prefer.I have the indicators for ACD, the pivot range and the 3 -day mobile pivot, but I don't know how to upload them.

[mobemcombi]

Citing well, values ??A and C can be obtained as follows: A = 10% of ATR C = 1.5 * A good, all this is a bit mixed.Values ??A and C are not so important, you can use the ones you prefer.I have the indicators for ACD, the pivot range and the 3 -day mobile pivot, but I don't know how to upload them.I have never done it before, but it seems that you need to click on the "attach files to your publication" in additional options that you will see just below where you publish your message.Then you are looking for and up the file, and voila.Spa

[CamlaLM]

Here are the indicators!=

[oxminasg]

Citing well, values ??A and C can be obtained as follows: A = 10% of ATR C = 1.5 * A good, all this is a bit mixed.Values ??A and C are not so important, you can use the ones you prefer.I have the indicators for ACD, the pivot range and the 3 -day mobile pivot, but I don't know how to upload them.What is ATR?

[ilayn4o96]

ATR MEANS AVREGE TRUE RANGE (True average range

[javiemageva]

Citing ATR means average True Range and True Range is essentially the range, but will use the closure of the anterior bar as the maximum or minimum if it is greater than the maximum or minimum.Basically, it takes into account the gaps in the rank calculations.In training, you are just as intelligent as your dumber mistake.- Ralph Vince

[cambu58]

I have The Logical Trader.There are some videos of Mark Fisher talking about this on the Nymex website.It is definitely worth seeing, it is nice to listen to him.Understanding the concept of C is really interesting.If you see a C operation, it means that the rest of the market has taken an operation of A and is caught.It is a good general idea to operate if you can identify operations where everyone wants to get out of their positions and you are on the right side.Bwuhahaha!Silverb in Trading, you are just as intelligent as your darker mistake.- Ralph Vince

[gaoxyn.bailok]

When you apply the ACD concept to the Forex, what temporary frame do you use for the opening range of the GBP/USD?Would it be the opening of London?

[oxilxo]

Yes, you would use the opening of London.However, I am testing if using New York opening would be better.It seems that it works better according to what I have seen.

[cmispollemhag]

Citing here are the indicators!=

[Moemmokg]

This message is for Spartan and other members.The ACD method developed by Mark Fisher is not based on ATR.It is based on the daily opening range, and up/down and C up/down they are counted every day depending on the opening range.I use these levels of 10% of ATR and 22% of ATR as reference points in my graphics, sometimes to get out of open positions.

[Gavigvicaino33]

I can provide you with A and C. What vehicle do you operate?

[jemwzana83]

Citing I can provide you with the levels of A and C. What vehicle do you operate?Hello!It seems that you have some experience with this.I barely encountered this method in another place and intrigues me enough to take a look.I am operating e/u, g/u and u/y.I appreciate your comments.Thank you.Steve

[anpkniguli]

Hello.I also O-U, G-U, I don't like the U-J lately.Also Opero USD-CAD, USD-CHF, Aud-UD.It depends on the conditions of those vehicles.Use Design, which draws up to up/down and C levels and C up/down every day.I use an opening range of 10 minutes, but I always check the opening ranges of 5, 15 and 30 minutes to filter them.I also added levels of 22% and 10% of ATR from the opening range above and below the opening range as reference points.Logically divide the market into two parts: session of the day and premarket.You can use two sessions per day.The first: 02: 30-16: 00 East time (opening of European markets through the US market session.

[cokchifemnangwz]

Hello.I also O-U, G-U, I don't like the U-J lately.Also Opero USD-CAD, USD-CHF, Aud-UD.It depends on the conditions of those vehicles.Use Design, which draws up to up/down and C levels and C up/down every day.I use an opening range of 10 minutes, but I always check the opening ranges of 5, 15 and 30 minutes to filter them.I also added levels of 22% and 10% of ATR from the opening range above and below the opening range as reference points.Logically divide the market into two parts: session of the day and premarket.You can use two sessions per day.The first: 02: 30-16: 00 East time (opening of European markets through the US market session.

[AJMogmigwz19]

Yes, you would use the opening of London.However, I am testing if using New York opening would be better.It seems that it works better according to what I have seen.If the experience shows you that using New York opening gives better results, because there is.But I look for ruptures based on the opening of London.Moneyhackers tracks the hourly volatility and the greatest increase in the range occurs in the opening of London.This is how I measure my day to calculate the ATR.By the way, I take the 20 days.Does anyone have an opinion about a different parameter?

[JllePN]

Citing yes, you would use the opening of London.However, I am testing if using New York opening would be better.It seems that it works better according to what I have seen.If the experience shows you that using New York opening gives better results, because there is.But I look for ruptures based on the opening of London.Moneyhackers tracks the hourly volatility and the greatest increase in the range occurs in the opening of London.This is how I measure my day to calculate the ATR.By the way, I take the 20 days.Does anyone have an opinion about a different parameter?Thanks for that link.Good information.