BAT EA modifiion

[javagabagu]

I've been utilizing the BAT EA given to all by Fuki (Separate thread here on FF) and have discovered that it is incredibly profitable when you eliminate the 2nd and 3rd trades. You are able to look at the BAT ATR indior on any chart and see quite profitable trades assuming the EA chooses the transactions. The question I would like help with will be simple for the developers, but I am not a developer. When I turn off trades 2 and 3 by changing the trade volume to 0, I get invalid parameter errors and basically the EA ceases functioning. If we could find this to choose the first trade just and not reload on the fib retracements, this EA will be incredibly profitable. If someone can resolve this programming issue then the tendencies will look after the rest.

[javagabagu]

Charlie,

That is a Fascinating idea. I'm always of the mindset that two (or more) heads work better than one. My whole reason behind joinfnigeriaforextradingand beginning this thread is for community success in the markets.

Mike

[javagabagu]

The EA and indior are connected below.
Https://www.nigeriaforextrading.com/attachments/15274613841357041987.5 free version
https://www.nigeriaforextrading.com/attachments/15274613862125566475.mq4

[Pilam]

Mothman,

I also trade the BAT I believe there are prob only a few people that do. . I hope u have been earning money from the computer system. . I would be intered in also making a couple little changes to this system to see if I could make more profitable... I have considered not to use the retracement trades and possibly to attempt to use a diff method of putting the stop... maybe just below or above the 61.8 retracement level.

Would be intested to here your views.

Cheers Charlie

[javagabagu]

Charlie,

Are you trading BAT manually or Utilizing Fuki's EA? I have been using the EA since I don't have enough time to be in the front of the computer all day to monitor transactions. The problem with the EA is that you just make good money on the large trend moves which happen very often on the 1 hr and 4 hr timeframes only to give back the profits with the retracement transactions during consolidation. If we could find out how to produce the EA not take the retracement transactions and take each the first trade signs, then the profits will soon follow. Looking forward to your ideas.

Mike

[Lucaymomemllanlana]

If you trade the BAT system on the 1 hour chart just and take another candle that exceeds the first candle which crosses the BAT line. Move stop reduction to Split after 50 pips.

It's a 75% success rate on the GBP/JPY.

Waiting for another candle must be within 5 hours that this filters out alot of false b
trades.

Try looking back and you'll see what I mean.

I Don't bother with extra transactions just 1 lot

Regards
Dave

[igomllliza]

'OrderReliable.mqh' - can't open the app file C:\Program Files\Metatrader 4-Metaquotes\experts\BAT EA V 1[1].5 free version.mq4 (26, 1)
once I compile this EA I get preceding message.

[javagabagu]

Dave,

You are trading BAT manually I assume? I like your idea. I will have to look back on a few GBP/JPY charts. Thank you

Mike

[javagabagu]

Adria.

I copied the documents from article #141 of The BAT method- The EA by Fuki on nigeriaforextrading. That article has the directions on the best way to install. Hope this helps.

Mike

[g11c02]

1 Attachment(s)
'OrderReliable.mqh' - cannot open the program file C:\Program Files\Metatrader 4-Metaquotes\experts\BAT EA V 1[1].5 free version.mq4 (26, 1)
once I compile this EA I get previous message. Place this record into c:\Program Files\FXDD - MetaTrader 4\experts\comprise dir
https://www.nigeriaforextrading.com/bitcoin-talk-and-cryptocurrencies/193-weiss-cryptocurrency-ratings.html

[g11c02]

The EA and indior are connected below. Hope it's what you desire.

Change log:
1. Comment all limit order line,there is absolutely no limit order will be available
https://www.nigeriaforextrading.com/attachments/15274613902009960665.zip

[Lucaymomemllanlana]

Dave,

you're trading BAT manually I presume? I like your idea. I will have to look back on a few GBP/JPY charts. Thanks

Mike You can get quite a few 0 transactions at a ranging market ( you have stopped out at Break even) but that is fine with me, but when the market tendencies you always get the move along with the trailing stops work beautifully

Dave

[Pilam]

Mothman and others,

I have been doing my own testing and happen to be entering with 2 lots in the BAT line. Then I have my discontinue 35 pips below this amount for your GBPUSD. 1 target is left in the 1.44 fib expansion and then stop is moved to B/E. Another lot is left at B/E or even the bat monitoring stop.

I believe that it would be helpful to work on a way to maximise this systems profitability with a smooth equity curve without the usage of their retracements. I like to use a 35 pip cease as this helps miximise risk to reward and would allow u to trade more lots on a single trade. This obvioulsy means u do miss some good traded but.... You do not get something for nothing. I have used this 35 pip cease on additional GBPUSD systems of mine and know that an X Royal bank of Canada trader used this stop level frequently in his own trading.
GBPJPY is a 50 pip stop and AUDJPY is a 30 pip stop.

Like to listen to your perspectives on this... perhaps we should try to work collectively on turbo charging this system....

Cheers Charlie

[Pilam]

OK,

I'm also considering applying the rule where price must split the price that split the BAT line by 5 pips within 5 price bars. As stated in a post above, I will get testing on this.

Charlie

[javagabagu]

Muyuan 11,

I will give this EA a try and find out how it functions. I appreciate your help. I will post my finding here in this forum.

Mike

[Pilam]

Charlie,

That is a Fascinating idea. I am always of the mindset that 2 (or more) heads work better than you. My whole reason behind joinfnigeriaforextradingand starting this thread is for community achievement in the markets.

Mike
Mike,

I am testing my ideas right now and will get back with outcomes if good or bad. I am hoping to have teh first idea tested within the day.

Cheers Charlie

[Ginesvicky]

Hi to all,
the BAT EA, been talking about, I would love to visits fuki's thread, please someone guide me to the right ribbon on the EA discussion. .
Thanks.

[javagabagu]

Here's a hyperlink to the original thread by fuki:

https://www.nigeriaforextrading.com/bitcoin-talk-and-cryptocurrencies/251-best-trend-strength-indior-ea.html

[Pilam]

I am working on this... anybody with any ideas they have TESTED or intend to test?

[Semies]

I've Got the same
I Shut manually

[Commeo78]

I believe.
But I don't understand where he is.

[Semies]

I dont know how profitable it is it only loose.

[Commeo78]

Can you please place the EA that you're using now maybe the one that I use has an issue.

Thank you

[anasb15]

The only one trade indied by Mothman has been a fantastic idea.

I have attached the EA altered, and yet another version with all the 61.8 fib SL (for Carlos, I don't know if it works).

I have tried original EA and modified one (the first) and have attached the forward testing for this week to this particular post.

The greater profits I have seen for these EA were:

11k$ for the modified
9k$ for the first

I discovered there is a lot of mistakes, too many errors on both and the EA certainly does not do the job well and the results are far away of the manual trading system.

We have for example 520 pips this week to get GBPJPY using the manual BAT system. Whereas the EA generates -97 using the first variation and 528 pips with the altered.

Also the Relative Drawdown is overly important even for the modified one.

This is what will be the net results I have discovered with manual BAT system and a few variations (for august 2007 on GBPJPY just, H1):

Initial BAT method: 775 pips
BAT system TP fib 161.8 (for all trades): 338 pips
BAT platform [only 1 transaction ]: 1108 pips
BAT platform [only 1 transaction ] SL fib 61.8: 900 pips
BAT platform [only 1 transaction ] SL fib 61.8 TP fib 161.8: 624 pips

See pictures attached.

Https://www.nigeriaforextrading.com/attachments/1527461746.jpg
Hi
Cheers for the ea's...I'm tryin the 1 commerce and its workin nicely for me taking trades both instructions, but was wondering is there a way to mention enter 3 lots or whatever you like but be able to take profit at the 161.8 degree with 1 or 2 of those lots. Letting another run until bat line?

I looked at the coding, but have no idea. . ~!!! Will need to learn it

cheers in advance

[juspk147]

Who analyzing it? I can try the 1 commerce version on a demo account however in case a need to switch the trade2volume and trade3volmue.

Anyone can assist me? thanks.

[juspk147]

The 1 commerce version isn't available trades. https://www.nigeriaforextrading.com/attachments/1527461746.jpghttps://www.nigeriaforextrading.com/attachments/1527461746.jpg

[juspk147]

I was incorrect about open trades but the EA don't close the trade ate 161.8%.

Could anyone fix it?

thanks

[sulajo]

Currently utilizing the following EA for bat system posted below. Everything works great. But can someone change this so it takes Profit/close transactions #1 at1 Fib level? Or does anybody have this EA using TP set at 161 fib that I can mess with?
Https://www.nigeriaforextrading.com/attachments/15274617551420023628.5 free variant
https://www.nigeriaforextrading.com/bitcoin-talk-and-cryptocurrencies/144-normalize-indior.html

[lobusss]

Hello,

Can someone explain the goal of the'OrderReliable' document that is set in the Interbank FX Trader 4\experts\comprise folder?

thks,

[eslmexxaazul68]

The order placement isn't as robus since it ought to be on MT4.
All sort of weird issues could pop up.
OrderReliable requires you orders and goes through a lot of difficulty making sure that the orders are executed correctly.

[lobusss]

The order placement is not as robus since it should be on MT4.
All sort of weird issues can pop up.
OrderReliable takes orders and goes through a lot of difficulty making sure that the orders are implemented correctly. Due TraderSeven. Https://www.nigeriaforextrading.com/attachments/1527461746.jpg

I am currently running the BAT EA V1.5 free version together with the OrderReliable also it appears to be working fine up to now though it seems the fib amounts are tagged incorrectly.

regards,

[lobusss]

Hello,

Only a few questions about Establishing the Bat EA 1.5freeversion.

What exactly does the”Use BAT ATR Indior” choice do and how should it be set?

Should the”Permit DLL imports” choice be labeled when using this EA?

Can this EA battle with another EA when using it on precisely the exact same currency pair?


Additionally, while analyzing this EA on a demo account, I noticed on extended transactions the EA implements the buy trade as soon as the ASK price hits the BAT line rather than when the BID price hits it. This gets you in trade with no opposing BAT line being created that means you would miss the corresponding halt and reverse trade to the short side. Would anyone be prepared to fix this issue in the EA and place the revised EA file with this thread?

Thanks,

[choolas88]

Hello,

Only a Couple of questions about setting up the Bat EA 1.5freeversion.

What does the”Use BAT ATR Indior” option do and how should it be put?

Should the”Allow DLL imports” option be labeled when employing this EA?

Will this EA conflict with a different EA when using it on the same currency pair?


Also, while analyzing this EA on a demo account, I detected on extended transactions the EA implements the buy trade as soon as the ASK price hits the BAT line rather than when the BID price strikes it. This puts you into a commerce without the opposing BAT line being created that means you would miss the corresponding halt and reverse transaction into the short side. Would anyone be prepared to correct this issue in the EA and place the revised EA document on this thread?

Thanks,

CFII

I am using BAT ATR indior v1, settings ATR interval 5 and variable 4,”Allow DLL imports” not labelled

when hitting the current BAT line (profit or loss depends), EA unlocks a new commerce, and then new BAT line is issued.
By me this EA does not need the modifiion you mention if I understand well what you mean.
I am testing this EA in a demo account till 3 weeks with quite good results

[lobusss]

I'm using BAT ATR indior v1, settings ATR interval 5 and variable 4,”Allow DLL imports” not labelled

when hitting the current BAT line (profit or loss depends), EA opens a new commerce, and then new BAT line is issued.
By me this EA doesn't need the modifiion you mention if I understand well what you mean.
I'm testing this EA at a demo account till 3 weeks with very good results Hello frageor,

Thank you for your answer. Https://www.nigeriaforextrading.com/attachments/1527461746.jpg

I'm using the BAT ATR indior v1 (ATR interval 5 and variable 4)in addition to BAT EA v1.5free edition.

I have attached a screenshot of what I am discussing. The demonion commerce was on the GBPJPY using IBFX broker.

First BAT short commerce was at 226.05 that was stopped out at 224.97. As one can see by taking a look at the price bars, the bid price (this is a bid chart) not attained the green BAT line (224.89 was the maximum price it attained ) yet the first short transaction was stopped out along with a new long transaction had been entered (stop and reverse). But because the bid price never struck the green BAT lineup, the production of a new red BAT line was not initiated. This averted a halt and reverse of their long BAT entry which was at 224.97.

In short, not only did the first short entry get stopped , the fact that the bid price never struck the green BAT line averted a subsequent halt and reverse back into the short side.

Additionally, thanks to Fukinagashi for creating this EA and sharing it with us. https://www.nigeriaforextrading.com/attachments/1527461746.jpg

thanks,


https://www.nigeriaforextrading.com/attachments/1527461746.jpg

[olicws]

Please put EA here